Description

Trailing Arm Repair Kit for use with Heli-Coils is Part# TARK-HC

The difference between kits -KS & -HC are the insert type you plan on using i.e KeenSerts or Heli-Coils. While the jig plate is the same for both kits, the drill & tap insert guides are different so make sure you use the correct inserts with the jig that you are ordering.

These kits DO NOT INCLUDE the drill, bottoming tap or inserts. You will also need a good quality tap lubricant for use in aluminum for both drilling and tapping. WD40 is an OK substitute

Heli-Coils are also available from many sources but as a former NAPA store owner I’d just recommend you order NAPA part # BK 770-3082. This kit contains 12 inserts, the insertion tool and the tap. It DOES NOT INCLUDE a 21/64″ drill bit or tap lubricant. Additional inserts can be ordered under NAPA part #BK 770-3132.

Please specify the kit based on the threaded inserts that you will be using.

Trailing Arm Repair Kit for use with Heli-Coils is Part# TARK-HC