TR6, TR250, & GT6 Fan Eliminator Kit with a Grade 8 Bolt



Kit for the TR6, TR250, and GT6 with an automotive grade 8 crankshaft bolt equal or stronger than the original Triumph bolt.


Additional information


This product is designed for but not limited to the following Automobile(s).




TR250, TR6, GT6


Fan Eliminator Kit – Why Install It?

People spend thousands of dollars trying to gain horsepower yet they often overlook a quick, easy and inexpensive fix. Dollar for dollar, the biggest bang for the buck……………well, you get the idea! Triumph TR250 and TR6 & GT6 all have mechanical fans which are quite heavy and rob the engine of horsepower. Replacing the engine driven 6-1/2 pounds of fan components with an 8 ounce piece of billeted aluminum gives you an instant horsepower boost. You will, of course, have to install an electric fan to keep your engine cool but you’ll find that it rarely runs, especially when you’re driving over 40 MPH.



Converting a Triumph from a mechanical cooling fan to an electrical fan is just about the perfect first upgrade. Benefits include improved cooling, horsepower savings, slight savings in fuel consumption. Some say the original crankshaft driven fan robs about six (6) horsepower! Removal of the original fan set up allows an electric fan to be mounted behind the radiator in a “puller” configuration.


Weighing the original parts from a 1975 TR6, (the cast iron fan spacer, center bolt, steel fan mount ring, and red 13 blade fan) came to 6lbs 6oz. The aluminum replacement with bolt and lock washer weigh a total of 8.35oz. Simply put, the Fan Kit reduces your original mechanical fan weight by 92%! This reduction in rotating mass allows for quicker acceleration and an instant gain in horsepower.


The fan eliminator is a replacement for the original cast iron fan spacer. Machined from a billet of aircraft aluminum (6061), it is stronger and far lighter than the original. Testing the aluminum retainer for distortion was done by actually over-torquing the retainer bolt to more than 150 ft lbs, the max rating for my torque wrench. Other than a mar from the lock washer, no damage at all was done to the retainer.

1 Eliminator

1 Grade 8 bolt

1 Split Washer

1 Flat washer

Detailed documents, videos and downloads on installation can be found in Product Support.

Also see: TR250, TR6 & GT6 Fan Eliminator Kit – Installation


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


Build To Order Request

Are you in need of a built-to-order kit?
Please use this form to discuss your individual requirements needed in detail for your car.
I will review your request and be in touch.
Rick Patton
Contact Info.
Vehicle Information
To help us guarantee the correct parts for your classic car. Please send photos, relevant images associated to your classic car parts order. Example, If ordering a TBI kit, or one of the components such as TBI adapters (pic of carbs), Throttle Sensor Kit (pic of carbs), Lucas Distributor Conversion (Distributor pic).
Max. File Size 20MB Allowed File Types: png,jpg,pdf,gif Max. Files: 5