|
Order and Pricing Information
Because most kits are custom built to order,
please
email or call me
any evening at (207-729-5928 ) to discuss your individual
requirements, final costs and delivery interval. I accept cash, money
orders and Paypal.
Please send a check or money order, made out to
Rick Patton, for the appropriate amount to: R. Patton, 5 Jeff St,
Brunswick, Maine 04011. Please include your mailing address and email
address with your payment. Payment can also be made with Paypal. Paypal
address is
rick@pattonmachine.com
I am now offering kits for 4, 6 & 8 cylinder cars
which have either 1,2 or 3 carbs in the configurations shown below.
Please check the Carburetor Chart
for the ZS, SU & Hitachi models supported.
Pictures of the various components can be viewed
on the TBI Component Page.
NOTE: There are 2 distributor options as
described here.
Prices do not include shipping which is
dependent on components ordered.
|
Four (4) Cylinder Engine Throttle Body Injection Kit |
|
|
Without Distributor
Conversion** |
With Distributor Conversion
& Ignition Mapping |
|
Kit Components |
One (1) Carb |
Two (2) Carbs |
One (1) Carb |
Two (2) Carbs |
|
Carburetor TBI Adapters |
√ |
√√ |
√ |
√√ |
|
GM Ignition Module with Mount |
|
|
√ |
√ |
|
Lucas Distributor Conversion |
|
|
√ |
√ |
|
Complete Plug Ended TBI Harness |
√ |
√ |
√ |
√ |
|
Pre-Programmed GM Electronic Control Module (ECM) |
√ |
√ |
√ |
√ |
|
Fuel Pump with Bracket |
√ |
√ |
√ |
√ |
|
Adjustable Regulator with Gauge & Fittings |
√ |
√ |
√ |
√ |
|
O2, Coolant & MAP Sensors |
√ |
√ |
√ |
√ |
|
Throttle Position Sensor Kit |
√ |
√ |
√ |
√ |
|
Reconditioned Matched Injectors |
√ |
√√ |
√ |
√√ |
|
All Necessary Relays & Fuses |
√ |
√ |
√ |
√ |
|
USB Data Logging Cable & Disk |
√ |
√ |
√ |
√ |
|
AFI Installation Manual & Online Documentation |
√ |
√ |
√ |
√ |
|
Technical Support |
√ |
√ |
√ |
√ |
|
Custom tuning assistance (up to four chips) |
√ |
√ |
√ |
√ |
|
Price |
$1,374.99 |
$1,499.99 |
$1,499.99 |
$1,599.99 |
|
Kit Options |
|
|
|
|
|
Idle Air Control (IAC) - needed for cars w/ A/C & AT |
$159.99 |
$159.99 |
$159.99 |
$159.99 |
|
Decorative Adapter Covers
-
Zenith Stromberg Only |
$49.99 |
$89.99 |
$49.99 |
$89.99 |
|
**Owner supplied electronic
ignition required |
|
|
|
|
|
|
Six (6) Cylinder Engine Throttle Body Injection
Kit |
|
|
Without Distributor
Conversion** |
With Distributor Conversion
& Ignition Mapping |
|
Kit Components |
Two (2) Carbs |
Three (3) Carbs |
Two (2) Carbs |
Three (3) Carbs |
|
Carburetor TBI Adapters * See Note Below |
√√ |
√√√ |
√√ |
√√√ |
|
GM Ignition Module with Mount |
|
|
√ |
√ |
|
Lucas Distributor Conversion |
|
|
√ |
√ |
|
Complete Plug Ended TBI Harness |
√ |
√ |
√ |
√ |
|
Pre-Programmed GM Electronic Control Module
(ECM) |
√ |
√ |
√ |
√ |
|
Fuel Pump with Bracket |
√ |
√ |
√ |
√ |
|
Adjustable Regulator with Gauge & Fittings |
√ |
√ |
√ |
√ |
|
O2, Coolant & MAP Sensors |
√ |
√ |
√ |
√ |
|
Throttle Position Sensor Kit |
√ |
√ |
√ |
√ |
|
Reconditioned Matched Injectors |
√√ |
√√√ |
√√ |
√√√ |
|
All Necessary Relays & Fuses |
√ |
√ |
√ |
√ |
|
USB Data Logging Cable & Disk |
√ |
√ |
√ |
√ |
|
AFI Installation Manual & Online Documentation |
√ |
√ |
√ |
√ |
|
Technical Support |
√ |
√ |
√ |
√ |
|
Custom tuning assistance (up to four chips) |
√ |
√ |
√ |
√ |
|
Price |
$1,474.99 |
$1,999.99 |
$1,599.99 |
$2,199.99 |
|
Kit Options |
|
|
|
|
|
Idle Air Control (IAC) - needed for cars w/ A/C
& AT |
$159.99 |
$159.99 |
$159.99 |
$159.99 |
|
Decorative Adapter Covers -
Zenith Stromberg Only |
$89.99 |
$134.99 |
$89.99 |
$134.99 |
|
*For SU HD8 and HS8 carbs,
add $25 per adapter
**Owner supplied electronic
ignition required |
|
|
|
|
|
|
Eight (8) Cylinder Engine Throttle Body
Injection Kit |
|
|
Without Distributor
Conversion* |
With Distributor
Conversion & Ignition Mapping** |
|
Kit Components |
Two (2) Carbs** |
Two (2) Carbs** |
|
Carburetor TBI Adapters |
√√ |
√√ |
|
GM Ignition Module with Mount |
NA |
√ |
|
Lucas Distributor Conversion |
NA |
√ |
|
Complete Plug Ended TBI Harness |
√ |
√ |
|
Pre-Programmed GM Electronic Control Module
(ECM) |
√ |
√ |
|
Fuel Pump with Bracket |
√ |
√ |
|
Adjustable Regulator with Gauge & Fittings |
√ |
√ |
|
O2, Coolant & MAP Sensors |
√ |
√ |
|
Throttle Position Sensor Kit |
√ |
√ |
|
Reconditioned Matched Injectors |
√√ |
√√ |
|
All Necessary Relays & Fuses |
√ |
√ |
|
USB Data Logging Cable & Disk |
√ |
√ |
|
AFI Installation Manual & Online Documentation |
√ |
√ |
|
Technical Support |
√ |
√ |
|
Custom tuning assistance (up to four chips) |
√ |
√ |
|
Idle Air Control (IAC) |
√ |
√ |
|
Price |
$1,689.99 |
$1849.99 |
|
Kit Options |
|
|
Decorative Adapter
Covers - Zenith
Stromberg Only |
$89.99 |
|
*Owner supplied electronic ignition required
**For "points style" Lucas Distributors |
|
|
|
Conversion components to build your own kit |
NOTE: Purchasers of components will have
to source
all of the other kit components
themselves. |
| |
|
|
Carb Adapters |
|
|
ZS 150CD Adapter - one per carb required |
$124.99 |
|
ZS 175CD Adapter- one per carb required |
$124.99 |
|
SU HS6 Adapter- one per carb required |
$124.99 |
|
HIF6, HIF44 Adapter – one per carb |
$124.99 |
|
HD8, HS8 Adapter- one per carb |
$149.99 |
|
HS4 Adapter- one per carb |
$124.99 |
|
Hitachi - Large 3 screw Flat Top - one per carb |
$149.99 |
|
Hitachi - early 3 screw carb, 240Z - one per
carb |
$124.99 |
| |
|
|
Throttle Position Sensor Kit |
|
|
ZS 150CD Adapter |
$99.99 |
|
ZS 175CD Adapter |
$99.99 |
|
SU HS6 Adapter |
$99.99 |
|
SU HIF6, HIF44 |
$99.99 |
|
SU HD8, HS8 |
$99.99 |
|
Hitachi - early 240Z Adapter |
$124.99 |
| |
|
|
GM Mini TBI Injectors - Reconditioned |
|
|
ZS 150CD - one per carb required |
$49.99 |
|
ZS 175CD - one per carb required |
$49.99 |
|
SU HS6 - one per carb required |
$49.99 |
|
SU HD8, HS8 one per carb required |
$49.99 |
|
Hitachi - early 240Z - one per carb
required |
$49.99 |
|
|
|
|
Pigtail Connector for Mini TBI Injector |
$19.99 |
|
|
|
|
Decorative Adapter
Covers |
|
|
Zenith Stromberg Carbs Only |
|
|
One Cover @ |
$49.99 |
|
Two Covers @ |
$89.99 |
|
Three Covers @ |
$134.99 |
|
|
|
|
Lucas Distributor conversion to magnetic pick up
w/o advance |
|
|
This is the conversion kit used with ECM
ignition mapping.
- For 4 and 6 cylinder distributors. |
$124.99 |
|
|
|
|
|
|
|
|
|
|
Idle Air module |
|
|
|
|
For universal use- (harness and software not
included)
 |
$159.99 |
|
Adapter Covers
 |
These covers are custom made from
6061 Billeted Aluminum and are machined to be a perfect
match to the Zenith Stromberg carbs. |
|
